Chiller: How Vapor Absorption Chiller Works?

The efficiency of worker and machine in engineering plant can be increased in controlled temperature conditions. To control the temperature of a space, air-conditioned machines are used. Depending up on the area to be cooled various types of conditioners are invented. These machines can work on different working principle. Here you will know some thing about vapor absorption technology.

 

What is mean by Vapor?

A vapor is a substance in the gas phase at a temperature lower than its critical temperature. This means that the vapor can be condensed to a liquid or to a solid by increasing its pressure, without reducing the temperature. The critical temperature of a substance is the temperature at and above which vapor of the substance cannot be liquefied, no matter how much pressure is applied. The critical pressure of a substance is the pressure required to liquefy a gas at its critical temperature.

 

The vapor pressure is the equilibrium pressure from a liquid or a solid at a specific temperature.

 

What is meaning of Absorption?

Absorption is a physical or chemical phenomenon or a process in which atoms, molecules, or ions enter some bulk phase – gas, liquid or solid material. Absorption is basically where something takes in another substance.

 

What is meaning by Chiller?

A chiller is a machine that removes heat from a liquid via a vapor-compression or absorption refrigeration cycle. Absorption chillers utilize water as the refrigerant and rely on the strong affinity between the water and a lithium bromide solution to achieve a refrigeration effect.

 

Decentralize chillers are usually small in size (cooling capacity), usually from 0.2 tons to 10 tons. Central chillers generally have capacities ranging from ten tons to hundreds or thousands of tons.

 

How single effect absorption chiller works?

The single effect absorption cycle uses water as the refrigerant and lithium bromide as the absorbent. It is the strong affinity that these two substances have for one another that makes the cycle work. The entire process occurs in almost a complete vacuum.

 

1. Solution Pump

A dilute lithium bromide solution is collected in the bottom of the absorber shell. From here, a hermetic solution pump moves the solution through a shell and tube heat exchanger for preheating.

 

2. Generator

After exiting the heat exchanger, the dilute solution moves into the upper shell. The solution surrounds a bundle of tubes which carries either steam or hot water. The steam or hot water transfers heat into the pool of dilute lithium bromide solution. The solution boils, sending refrigerant vapor upward into the condenser and leaving behind concentrated lithium bromide. The concentrated lithium bromide solution moves down to the heat exchanger, where it is cooled by the weak solution being pumped up to the generator.

 

3. Condenser 

The refrigerant vapor migrates through mist eliminators to the condenser tube bundle. The refrigerant vapor condenses on the tubes. The heat is removed by the cooling water which moves through the inside of the tubes. As the refrigerant condenses, it collects in a trough at the bottom of the condenser.

 

4. Evaporator

The refrigerant liquid moves from the condenser in the upper shell down to the evaporator in the lower shell and is sprayed over the evaporator tube bundle. Due to the extreme vacuum of the lower shell, the refrigerant liquid boils at approximately 39°F (3.9°C), creating the refrigerant effect. (This vacuum is created by hygroscopic action – the strong affinity lithium bromide has for water – in the Absorber directly below.)

 

5. Absorber 

As the refrigerant vapor migrates to the absorber from the evaporator, the strong lithium bromide solution from the generator is sprayed over the top of the absorber tube bundle. The strong lithium bromide solution actually pulls the refrigerant vapor into solution, creating the extreme vacuum in the evaporator. The absorption of the refrigerant vapor into the lithium bromide solution also generates heat which is removed by the cooling water. The now dilute lithium bromide solution collects in the bottom of the lower shell, where it flows down to the solution pump. The chilling cycle is now completed and the process begins once again.