Threshold Limit Value (TLV®)
Definition
Threshold Limit Values (TLV's) are guidelines (not standards) prepared by the American Conference of Governmental industrial Hygienists, Inc (ACGIH) to assist industrial hygienists in making decisions regarding safe levels of exposure to various hazards found in the workplace.
A TLV® reflects the level of exposure that the typical worker can experience without an unreasonable risk of disease or injury. TLVs® are not quantitative estimates of risk at different exposure levels or by different routes of exposure.
Additional Info
Whereas OSHA sets regulatory exposure limits/levels such as the PEL and TWA, TLV's® are a scientific opinion based solely on health factors; there is no consideration given to economic or technical feasibility of implementing controls to keep worker exposure levels below this level. These health risks/factors are determined by ACGIH from a review of existing peer-reviewed scientific literature by committees of experts in public health and related sciences. TLV's® are not consensus standards (i.e. formulated by a broad-based committee across a particular industry), but ACGIH's opinion.
ACGIH was forced to adopt a rigorously-worded stance regarding the use of TLV's® by regulatory agencies as a result of a lawsuit filed in 2000 by the trona industry;
In our opinion, while the plaintiffs raised some interesting points regarding due process issues and so-called "secret rulemaking", the implications of the suit are a blow to the timely review and incorporation of the latest peer-reviewed scientific studies into state and federal worker protection standards.
Although ACGIH TLV's® themselves do not carry the force of law, 29 CFR 1910.1200 (g)(2)(i)(C)(2) and (g)(2)(vi) require some kind of exposure limit such as an OSHA PEL or TLV® to be listed on the MSDS if such a limit is available.
TLV's and PEL's are not available for most chemicals; the absence of an exposure limit simply means that the chemical has not gone through the very rigorous and expensive scientific peer-review process that would permit conclusions to be drawn about "safe" and "hazardous" exposure levels. Unless the sheet specifically states that no danger exists, make every effort to limit your exposure through good chemical hygiene practices, workplace engineering controls and use of Personal Protective Equipment.
Definition
Threshold Limit Values (TLV's) are guidelines (not standards) prepared by the American Conference of Governmental industrial Hygienists, Inc (ACGIH) to assist industrial hygienists in making decisions regarding safe levels of exposure to various hazards found in the workplace.
A TLV® reflects the level of exposure that the typical worker can experience without an unreasonable risk of disease or injury. TLVs® are not quantitative estimates of risk at different exposure levels or by different routes of exposure.
Additional Info
Whereas OSHA sets regulatory exposure limits/levels such as the PEL and TWA, TLV's® are a scientific opinion based solely on health factors; there is no consideration given to economic or technical feasibility of implementing controls to keep worker exposure levels below this level. These health risks/factors are determined by ACGIH from a review of existing peer-reviewed scientific literature by committees of experts in public health and related sciences. TLV's® are not consensus standards (i.e. formulated by a broad-based committee across a particular industry), but ACGIH's opinion.
ACGIH was forced to adopt a rigorously-worded stance regarding the use of TLV's® by regulatory agencies as a result of a lawsuit filed in 2000 by the trona industry;
In our opinion, while the plaintiffs raised some interesting points regarding due process issues and so-called "secret rulemaking", the implications of the suit are a blow to the timely review and incorporation of the latest peer-reviewed scientific studies into state and federal worker protection standards.
Although ACGIH TLV's® themselves do not carry the force of law, 29 CFR 1910.1200 (g)(2)(i)(C)(2) and (g)(2)(vi) require some kind of exposure limit such as an OSHA PEL or TLV® to be listed on the MSDS if such a limit is available.
TLV's and PEL's are not available for most chemicals; the absence of an exposure limit simply means that the chemical has not gone through the very rigorous and expensive scientific peer-review process that would permit conclusions to be drawn about "safe" and "hazardous" exposure levels. Unless the sheet specifically states that no danger exists, make every effort to limit your exposure through good chemical hygiene practices, workplace engineering controls and use of Personal Protective Equipment.
No comments:
Post a Comment