MATERIAL HANDLING QUIZ
1. Which is the correct method in manual handling?
(1. Straight back)
(2. Bent leg)
2. What is the name of the disease caused due to improper lifting?
(Slipped disc)
3. Shell we roll the gas cylinder for transportation?
(No)
4. For handling rough and sharp materials, ---------------hand gloves must be used.
(Leather)
5. The color of the Acid and Alkali-proof gloves is-----------.
(Black)
6. The color of electrical resistance gloves is-------------------.
(Red)
7. To protect the X-rays and gamma rays -------------gloves must be used.
(Lead)
8. For lifting the machined components -------------rope must be used.
(Manila)
9. The factor of safety of a wire rope is --------------
(5)
10. For outer yard gentry crane -------------are essential.
(End stopper, Lock with rail)
11. Gas cylinders can be stacked one over the another as pyramid to the height of ------
(4 cylinders)
12. The bricks can be stacked in ----------------system.
(Cross bar)
13. For opening the drum containing flammable material, ------------------tools can be used.
(Non-sparking)
14. Material handling contributes above --------% in industrial accidents.
(33%)
15. A man can lift more with his legs than with his back.
(True)
16. Walking under suspended load is not harmful.
(No)
17. Sudden lifting is safer.
(No)
18. What is SWL
(Safe working load)
19. To transport the loads by hand trolley from lower level to upper level.
(Pulling)
20. To transport the load by hand trolley in slope from upper level to lower level.
(Pushing)
21. What is the name of guard used in the hand trolley to protect the hand?
(Knuckle guard)
22. Hand trolley can be pulled for transportation.
(No)
23. Improper filing of materials results in many accidents.
(Yes)
24. A check - list of the things to be inspected is not usually worthwhile.
(No)
25. If the wire ropes are having damage more ---------------% is to be rejected.
(10%)
26. For lifting hot objects which of the following can be used?
(1. Manila ropes.
2. Chain sling.
3. Wire rope)
27. For lifting the heavy plates by crane ------------can be used.
(Plate clamp)
28. What is EOT?
(Electrical Operated Overhead Trenches)
29. When a man is lifting the load, what are the precautionary methods he should take?
(1. His back should be arched
(2. He should keep his back straight.
(3. He should assure a full squatting position.)
30. The lifting ability of a man can be in proportionate to the weight of the man.
(False)
31. The Lifting Tackles can be dragged on the floor.
(No)
32. The over loading in the crane up to--------is allowable occasionally.
(25%)
33. Before lifting a load, the following should attend.
(Size, shape, and weight)
34. Gas cylinders are the best rollers for transporting the load.
(No)
35. Gas cylinders need to be chained.
(No)
36. For transporting the gas cylinder by cranes---------should be used.
(Cradle)
37. For the pyramid stacking of drums ------------ supporting is necessary.
(Wedge packing)
38. Material handling accidents cause damage to --------------.
(1. Men. 2.Materials. 3.Machinary. 4. All the three)
39. A material handling depends on.
(a) Individual who handles
(b) The method of handling
(c) The implements used
(d) All the above.
40. Select the basic principles of material handling from the following:
(a) Good grip
(b) Straight back
(c) Tuck the chin
(d) Feet in position
(e) Use body weight
(f) Arms close to the body
(a, b, d, e, f)
41. While using crow bar for material handling, we must ensure:
(a) correct leverage
(b) Pointed crow bar
(c) Inserting pack pieces
(d) All the three.
(d)
42. Lifting capacity of jacks is to be marked on them
(Yes)
43. Mechanical handling
(a) Quicken the process
(b) Economy for large scale employment
(c) All the above
(c)
44. Wheeled trucks are provided with-----------.
(a) 2 wheels
(b) 4 wheels
(c) 5wheels
(d) All the types.
(d)
45. In the two wheeled trucks, load must be placed----------
(a) In the front
(b) In the back
(c) In the middle
(d) In any way
(a)
46. In two wheeled trucks, load must be placed with center of gravity
(a) High
(b) Low
(c) Out side the bar
(b)
47. In two wheeled trucks -------------------.
(a) Truck should carry the load.
(b) Operator should only balance
(c) Running with truck allowed.
(b)
48. The position of the truck should be as follows:
(a) In down gradient follow
(b) In up gradient load
(c) In level ground load
(c)
49. In 5 wheeled trucks
(a) Steering handle is attached to swerving axle
(b) Steering handle is to be pulled
(a)
50. Oil collected at base of machine must be removed before jacking.
(Yes)
51. Load slip due to .
(a) Clamp
(b) Clamping
(c) Balancing
(d) All the three
(d)
52. Periodical inspection of lifting tackles should be done by-----------------.
(Competent Authority)
53. Give three defects, which may arise in the lifting tackles?
(a) Wear
(b) Elongation
(c) Opening Strand
54. The hook should be discarded if the opening of hook is ---------------
( More than 12% dia. of hook)
55. Hook can a twist of
(a) 10%
(b) 15%
(c) 20%
(d) 25%
56. While using lifting magnet, what are the safety points should be observed?
(a) Not to use close to steel machines
(b) Switches supplying power to magnet should be identified by “ Danger”
(c) Metal part of magnet to be grounded
(d) Supply to magnet from main feeder
( a, b, c, d)
57. Open hook can be used?
(No)
58. Dragging of load can be done.
(No)
59. Limit switches are generally provided for crane hoists.
(Yes)
60. Maximum allowable included angle of the lifting tackle is -------
(90 degree)
61. Over load trip devices are the disturbance in lifting
(No)
62. The signal can be given only by----------------.
(Rigger)
63. Large hooks must be provided with------------
(Swivel base)
64. Walking step in the EOT cranes should be provided on ---------------on side of the crane.
(Both)
65. Stop signal can be given only by --------------.
(Any body)
66. What would be the clearance level needed the gentry crane side?
(30”)
(1. Straight back)
(2. Bent leg)
2. What is the name of the disease caused due to improper lifting?
(Slipped disc)
3. Shell we roll the gas cylinder for transportation?
(No)
4. For handling rough and sharp materials, ---------------hand gloves must be used.
(Leather)
5. The color of the Acid and Alkali-proof gloves is-----------.
(Black)
6. The color of electrical resistance gloves is-------------------.
(Red)
7. To protect the X-rays and gamma rays -------------gloves must be used.
(Lead)
8. For lifting the machined components -------------rope must be used.
(Manila)
9. The factor of safety of a wire rope is --------------
(5)
10. For outer yard gentry crane -------------are essential.
(End stopper, Lock with rail)
11. Gas cylinders can be stacked one over the another as pyramid to the height of ------
(4 cylinders)
12. The bricks can be stacked in ----------------system.
(Cross bar)
13. For opening the drum containing flammable material, ------------------tools can be used.
(Non-sparking)
14. Material handling contributes above --------% in industrial accidents.
(33%)
15. A man can lift more with his legs than with his back.
(True)
16. Walking under suspended load is not harmful.
(No)
17. Sudden lifting is safer.
(No)
18. What is SWL
(Safe working load)
19. To transport the loads by hand trolley from lower level to upper level.
(Pulling)
20. To transport the load by hand trolley in slope from upper level to lower level.
(Pushing)
21. What is the name of guard used in the hand trolley to protect the hand?
(Knuckle guard)
22. Hand trolley can be pulled for transportation.
(No)
23. Improper filing of materials results in many accidents.
(Yes)
24. A check - list of the things to be inspected is not usually worthwhile.
(No)
25. If the wire ropes are having damage more ---------------% is to be rejected.
(10%)
26. For lifting hot objects which of the following can be used?
(1. Manila ropes.
2. Chain sling.
3. Wire rope)
27. For lifting the heavy plates by crane ------------can be used.
(Plate clamp)
28. What is EOT?
(Electrical Operated Overhead Trenches)
29. When a man is lifting the load, what are the precautionary methods he should take?
(1. His back should be arched
(2. He should keep his back straight.
(3. He should assure a full squatting position.)
30. The lifting ability of a man can be in proportionate to the weight of the man.
(False)
31. The Lifting Tackles can be dragged on the floor.
(No)
32. The over loading in the crane up to--------is allowable occasionally.
(25%)
33. Before lifting a load, the following should attend.
(Size, shape, and weight)
34. Gas cylinders are the best rollers for transporting the load.
(No)
35. Gas cylinders need to be chained.
(No)
36. For transporting the gas cylinder by cranes---------should be used.
(Cradle)
37. For the pyramid stacking of drums ------------ supporting is necessary.
(Wedge packing)
38. Material handling accidents cause damage to --------------.
(1. Men. 2.Materials. 3.Machinary. 4. All the three)
39. A material handling depends on.
(a) Individual who handles
(b) The method of handling
(c) The implements used
(d) All the above.
40. Select the basic principles of material handling from the following:
(a) Good grip
(b) Straight back
(c) Tuck the chin
(d) Feet in position
(e) Use body weight
(f) Arms close to the body
(a, b, d, e, f)
41. While using crow bar for material handling, we must ensure:
(a) correct leverage
(b) Pointed crow bar
(c) Inserting pack pieces
(d) All the three.
(d)
42. Lifting capacity of jacks is to be marked on them
(Yes)
43. Mechanical handling
(a) Quicken the process
(b) Economy for large scale employment
(c) All the above
(c)
44. Wheeled trucks are provided with-----------.
(a) 2 wheels
(b) 4 wheels
(c) 5wheels
(d) All the types.
(d)
45. In the two wheeled trucks, load must be placed----------
(a) In the front
(b) In the back
(c) In the middle
(d) In any way
(a)
46. In two wheeled trucks, load must be placed with center of gravity
(a) High
(b) Low
(c) Out side the bar
(b)
47. In two wheeled trucks -------------------.
(a) Truck should carry the load.
(b) Operator should only balance
(c) Running with truck allowed.
(b)
48. The position of the truck should be as follows:
(a) In down gradient follow
(b) In up gradient load
(c) In level ground load
(c)
49. In 5 wheeled trucks
(a) Steering handle is attached to swerving axle
(b) Steering handle is to be pulled
(a)
50. Oil collected at base of machine must be removed before jacking.
(Yes)
51. Load slip due to .
(a) Clamp
(b) Clamping
(c) Balancing
(d) All the three
(d)
52. Periodical inspection of lifting tackles should be done by-----------------.
(Competent Authority)
53. Give three defects, which may arise in the lifting tackles?
(a) Wear
(b) Elongation
(c) Opening Strand
54. The hook should be discarded if the opening of hook is ---------------
( More than 12% dia. of hook)
55. Hook can a twist of
(a) 10%
(b) 15%
(c) 20%
(d) 25%
56. While using lifting magnet, what are the safety points should be observed?
(a) Not to use close to steel machines
(b) Switches supplying power to magnet should be identified by “ Danger”
(c) Metal part of magnet to be grounded
(d) Supply to magnet from main feeder
( a, b, c, d)
57. Open hook can be used?
(No)
58. Dragging of load can be done.
(No)
59. Limit switches are generally provided for crane hoists.
(Yes)
60. Maximum allowable included angle of the lifting tackle is -------
(90 degree)
61. Over load trip devices are the disturbance in lifting
(No)
62. The signal can be given only by----------------.
(Rigger)
63. Large hooks must be provided with------------
(Swivel base)
64. Walking step in the EOT cranes should be provided on ---------------on side of the crane.
(Both)
65. Stop signal can be given only by --------------.
(Any body)
66. What would be the clearance level needed the gentry crane side?
(30”)
See also more and compare for best prices deals for Material Handling here!
ReplyDeletevery informative post .Thanks for sharing post
ReplyDeleteJost’s Material Handling provides innovative solutions for internal material handling needs for its customers so that it improves the efficiencies of their processes.
material handling
PIV
Constant Temperature Anemometry