Nagarjuna Management Services (NMS) is a strategic business unit of NFCL. NMS offers its expertise on a long-term basis for the management of chemical process plants, especially to ammonia and urea complexes worldwide.
The team of professionals managing the Fertilizer Plant have acquired wide and rich experience in smooth operation, troubleshooting and emergency handling. Engineers and Operators have provided maintenance services to fertilizer plants in Libya, Venezuela and the Middle East at the request of Process Licensors.
NMS offers services for taking over total responsibility of operation and maintenance (O & M) and other specialist services on long-term basis. NMS aims at fullest satisfaction of client in achieving pre-agreed targets on performance parameters. A comprehensive package of services include pre-commissioning, commissioning, guarantee run, normal operation, maintenance (routine as well as turnaround), inspection and condition monitoring, environment and safety services, laboratory and quality assurance, purchase and stores, process engineering and general engineering. In addition to O&M, NMS can take-up total project management services too, during project phase.
NMS also provides class room as well as field training to clients’ personnel for developing competencies and enhancing skills in plant services. This would enable the clients’ team taking over the operations subsequently at an appropriate time. For the provision of the services, NMS is backed by our business partners who are well known names in their respective fields,
|
|
| Nagarjuna Management Services |
Experience & Expertise
Nagarjuna Fertilizers & Chemicals Limited (NFCL) had set-up and commissioned its first ammonia and urea complex in 1992 at Kakinada, the south-eastern coastal town of Andhra Pradesh in India. The process plants are supported by offsites and utilities plants including steam and power generation and bagging / loading facilities. The Ammonia and Urea plants are based on technologies of M/s Haldor Topsoe, Denmark and Snamprogetti, Italy, respectively. The name plate capacity of ammonia plant is 990 tpd and that of urea is 1500 tpd. The plants were run successfully at high on-stream factor and capacity utilization with low energy consumption.
The quality, environmental and safety performance of the plant has been excellent.
In the year 1998, the second stream of ammonia and urea plants of same technology (with improved features) and capacities were commissioned at same site. Capacity utilization has been achieved consistently more than 140% per day basis, in these plants. Performance on various parameters of manufacturing excellence like quality, capacity utilization, on-stream factor, personnel and equipment safety and environmental friendliness has been world-class.
Our team of professionals who have operated, maintained and supervised the plant operations has acquired wide experience in smooth operation, troubleshooting and emergency handling.
Our engineers and operators have rendered their services for various other client companies in India and overseas with excellent client feedback on their performance. The team is equipped with professionals having experience in all leading ammonia and urea technologies.
Services Spectrum
Our team of experts provide world-class Operations & Maintenance Services to operating plants and new projects.
- Pre-commissioning, Commissioning and Operation of Plant
- Maintenance : Preventive, Breakdown and Turnaround
- Inspection and Condition Monitoring
- Environmental Services and Systems
- Safety Services and Systems
- Laboratory and Quality Assurance
- Plant Technical Services – technical and energy audit
- Plant problem diagnostics and troubleshooting
- Training
The operation group has wide experience of pre-commissioning, commissioning and operation of ammonia, urea, steam and power generationand other utilities plants. The group’s experience covers most of ammonia and urea process technologies. The group continuously updates its knowledge and skills by participating in various training programs, workshops and symposia in India and abroad. The plants are successfully operated at high capacity utilization and efficiency levels. The group experience includes successful commissioning of ammonia and urea plants of external clients within schedules set by clients.
Specific services offered:
Pre-commissioning, commissioning, operation and troubleshooting of plants.
Field and DCS trained paneloperators for process plants.
Training of plant engineers and operators.
Preparation of operation manual, standard operating procedures and emergency preparedness plans.
Original Equipment Manufacturer’s (OEM) and technology suppliers’ guidelines are normally followed for commissioning and operation of plants. Services can be customized to the needs of client.
|
Plant Maintenance
|
The Maintenance group has rich experience of installing, maintaining and overhauling of all process plant equipment – static and rotating machines. This group successfully maintains high design pressure and temperature vessels operating with corrosive services. Gas turbines, steam turbines, heavy-duty compressors and pumps are kept online with preventive and turnaround maintenance including overhauling of machines. Continuous improvement and updating of knowledge and skills is ensured by participating in training programs and workshops.
Modern-day tools of high precision and accuracy are used. Strict protocols on maintenance practices and equipment history are adhered to. OEM’s manuals and guidelines are generally followed for overhaul maintenance. In-house experience with NFCL plants have shown that this group can do quality job (right, first time) under demanding schedules. NFCL plants have run turnaround to turnaround. Supported by inspection and condition monitoring group and a central workshop, the group is capable of undertaking challenging plant maintenance assignments in India and abroad for total satisfaction of the clients.
|
| Inspection & Condition Monitoring |
This group provides scheduled inspections and condition monitoring online for various rotating and static equipment. It also takes up comprehensive inspection of majority of equipment and pipelines during plant turnaround. Based on the results of inspection and recommendations, repair and replacement jobs are taken up. All these steps have helped maintaining the plant in good condition and avoid breakdowns in plant operation.
The group comprises of highly accomplished mechanical and metallurgical engineers and skilled technicians with experience ranging from 9 to 15 years. The group has members, trained in different NDT methods upto ASNT / ISNT Level-II, who are capable of taking high quality inspection, health monitoring and analysis jobs on the field and in the laboratory. Some of the important services carried out by the group include corrosion monitoring, internal inspection of vessels, reformer tubes and furnace inspection, eddy current testing, thermal imaging of plant equipment and vibration analysis of all types of rotating equipment. Reliable failure analysis followed by suitable recommendations for corrective actions is another important activity.
Follow-up inspection is made for quality assurance of repair and maintenance. The group is equipped with state-of-art inspection aids and apparatus. The group has been active and in great demand by internal and external clients. The Group’s services have been highly appreciated by clients for quality and reliability.
|
| Environment Services |
The major services provided by this group include monitoring of liquid effluent quality, air emissions from various stacks and solidwaste disposal. The group co-ordinates with production group to ensure that all statutory and system requirements on environment are met. It is supported by a full-fledged state-of-art chemical laboratory. Managed and serviced by an accomplished team of professionals in chemical engineering and chemistry, the services offered are:
Environment Impact Analysis (EIA) studies for new projects and operating plants
Ambient Air Quality Monitoring
Management Systems
Consultancy services for implementation of ISO 14001, ISO 9001-2000 revised version and OHSAS 18001
Internal Auditors training on EMS and QMS
Integration of the EMS, QMS and OHSAS systems
Services of qualified auditors for certifying agencies
|
| Safety Services |
Ammonia, Urea and Steam & Power plant operations are hugely hazardous by nature. Safety professionals are key resources for working in close coordination with plant personnel to ensure total safety of the plant and machinery and human resources. This group also ensures meeting all statutory requirements. Safety guidelines are prepared, standards are framed and compliance is monitored. Site and Offsite emergency plans are prepared and issued. Emergency mock drills are conducted for all-time preparedness. Fire fighting system is kept in full readiness to fight any major or minor fire. The group imparts training and retraining to all plant professionals, factory workers, office workers and contract workmen. First aid and rescue training is imparted to select personnel for building effective first aid and rescue teams. The group is credited with helping the NFCL plants achieve the 5-star rating from British Safety Council.
|
| Laboratory & Quality Assurance |
Quality of raw materials, process chemicals, catalysts, intermediate compounds, products and environment parameters are monitored and assured through rigorous analysis done at various stages of supply chain. Our expert group providing services of laboratory analysis and quality assurance is fully geared to take-up assignments in this area. Information provided by this group is judiciously used by plant operation group to make corrective changes and maintain expected quality of all process streams and products. The group is supported by a state-of-art laboratory which houses some of the most modern sophisticated instruments and apparatus in addition to all normal analysis tools.
|
| Plant Technical Services |
A process and utilities plant site cannot be run efficiently without professional inputs from technicalservices group. These inputs generally are in the form of technical and energy audit of the plant, energy reporting and other MIS services. Any technical problem related to plant load, reliability, quality and efficiency needs a professional study for its solution. This exercise involves identification of relevant data, data collection, observation, analysis, process and general engineering calculations for problem diagnostics. Our expert group providing these services comprises of chemical and mechanical engineers with rich experience. The group has successfully troubleshot the bottlenecks of operating plants on many occasions after studying the plant problems. Several useful modifications have been carried out in the plant by this group for improving capacity, quality and efficiency of operations. The group is extensively using process and general engineering software including ASPEN.
|
|
|
No comments:
Post a Comment