| t Name: | Project Location: | |
| Inspected by: | Date: | Manufacturer: |
| Equipment #: | Serial #: | |
CRANE INSPECTION
| HOOK: | Yes | No |
| 1. Throat opening more than 15%. | ___ | __ |
| 2. Hook in twisted (not straight or on one plane). | ___ | __ |
| 3. More than 10% wear at the throat. | ___ | __ |
| 4. Any cracks or corrosion | ___ | __ |
| WEDGE SOCKETS: | ___ | __ |
| 1. Wire rope size and wedge socket is a proper match. | ___ | __ |
| 2. Dead end of wire rope extends at least 9 inches beyond wedge socket. | ___ | __ |
| 3. Dead end of the wire rope is secured properly. | ___ | __ |
| SHEAVES: | ||
| 1. The wire rope is seated properly in the sheaves. | ___ | __ |
| 2. The wire rope keepers (keeps cable from coming out of the sheaves) are in good shape. | ___ | __ |
| 3. Check the bolts on the sheave plates fortightness. | ___ | __ |
| 4. Check for any weld cracks. | ___ | __ |
| 5. Signs of bent or buckled panels or parts. | ___ | __ |
| BOOM: | ||
| 1. Hydraulic leaks. | ___ | __ |
| 2. Check all 4 sides of boom for bent parts or buckled panels. | ___ | __ |
| 3. Lattice boom extension is secured properly. | ___ | __ |
| 4. Lattice sections are not bent (each rib is straight). | ___ | __ |
| TIRES: | ||
| 1. Properly inflated (look on load charts for Manufacturing recommendations) | ___ | __ |
| 2. Cuts in the tires or bulges. | ___ | __ |
| FLUIDS: | ||
| 1. Crank case oil is clean and full. | ___ | __ |
| 2. Water is about 2 inches below cap. | ___ | __ |
| 3. Check hydraulic oil level. | ___ | __ |
| MISCELLANEOUS: | ||
| 1. Out rigger pads not cracked. | ___ | __ |
| 2. Hydraulic hoses in good condition. | ___ | __ |
| 3. The drum cable is properly spooled. | ___ | __ |
| 4. Handrails leading into crane cab are good. | ___ | __ |
| 5. Fire extinguisher is available. | ___ | __ |
| 6. Load chart is in cab. | ___ | __ |
| 7. Boom angle indicator is available and working. | ___ | __ |
| 8. Back alarm is working. | ___ | __ |
| 9. Engine is started and gauges are checked, working properly. | ___ | __ |
| 10. Out riggers are extended out; working properly. | ___ | __ |
| 11. Crane is leveled, workin gproperly. | ___ | __ |
| 12. Boom up, unlock the swing break, does it swing when level? | ___ | __ |
| 13. Swing through 360 degrees, does boom angle indicator stay the same throughout rotation. | ___ | __ |
| 14. Does the horn work. | ___ | __ |
| 15. Does boom swing break work properly? | ___ | __ |
| 16. Extend out the boom, are all sections extending evenly. | ___ | __ |
| 17. Brakes & brake systems check out. | ___ | __ |
| 18. Safety pressure relief valves check out. | ___ | __ |
No comments:
Post a Comment