India: Air Quality Standards

Contents     1 Overview     2 History     3 Technical Standards         3.1 National Ambient Air Quality Standards         3.2 Monitoring     4 Links         4.1 Regulatory Documents         4.2 Notes 1 Overview     Standard type: Ambient air quality standards     Regulating bodies: Further detail regarding India's regulatory bodies can be found on the India Regulatory Background page         Central Pollution Control Board (CPCB)         Ministry of Environment and Forest (MoEF)         Bureau of Indian Standards (BIS)     Current standard: Revised National Ambient Air Quality Standards, 2009     Applicability: Nationwide 2 History Interest in air quality management policies began in India during the 1970s. After the 1972 Stockholm Conference on the Human Environment, it became clear that the nation was in need of a uniform environmental law. As a result, the Air (Prevention and Control of Pollution) Act was passed by Parliament in 1981. With the goal of providing for the prevention, control, and abatement of air pollution, the first ambient air quality standards were adopted in 1982 by the Central Pollution Control Board (CPCB) and revised in 1994 and again in 2009. Agencies responsible for air quality standard creation and monitoring include CPCB and several State Pollution Control Boards (SPCBs). All of these entities fall under the control of the Ministry of Environment and Forest (MoEF). The CPCB, working together with the SPCBs, provides technical advice to MoEF in order to fulfill the objectives outlined in the Air Act of 1981. The Air Act mandates the CPCB and SPCBs to:     Establish national ambient air quality standards for criteria pollutants,     Assist government in planning future environmental prevention and control strategies,     Carry out research to better understand environmental issues,     Undertake nationwide air sampling to ascertain the ambient air quality in India and identification of the problem areas,     Conduct air quality inspections in areas of concern. [1] SPCBs can set more stringent standards than the existing national standards in their respective states. Such a process is similar to the local divisions used within the US EPA. Another legal document, the Environment (Protection) Act of 1986, does not specifically mention fuels or emission standards, but does authorize central and state governments to regulate activities that can harm the environment. Current ambient air quality standards are based on the authority of the Environment Act, 1986.

3 Technical Standards

3.1 National Ambient Air Quality Standards

National Ambient Air Quality Standards, as of 2009

Pollutant	Time Weighted Average	Concentration in Ambient Air
		Industrial, Residential, Rural and Other Area	Ecologically Sensitive Area (notified by Central Government)	Methods of Measurement
SO2, μg/m3	Annual*	50	20	Improved West and Gaeke Ultraviolet fluoresence
	24 hours**	80	80
NO2, μg/m3	Annual*	40	30	Modified Jacob & Hochheiser (Na-Arsenite) Chemiluminescence
	24 hours**	80	80
PM10, μg/m3	Annual*	60	60	Gravimetric TOEM Beta attenuation
	24 hours**	100	100
PM2.5, μg/m3	Annual*	40	40	Gravimetric TOEM Beta attenuation
	24 hours**	60	60
O3, μg/m3	8 hours**	100	100	UV photometric Chemiluminescence Chemical Method
	1 hour**	180	180
Lead (Pb), μg/m3	Annual*	0.50	0.50	AAS/ICP method after sampling on EMP 2000 or equivalent filter paper ED-XRF using Teflon filter
	24 hours**	1	1
CO, mg/m3	8 hours**	2	2	Non Dispersive Infra Red (NDIR) spectrosopy
	1 hour**	4	4
Ammonia (NH3) μg/m3	Annual*	100	100	Chemiluminescence Indophenol blue method
	24 hours**	400	400
Benzene	Annual*	5	5	Gas chromatography based on continuous analyzer Adsorption and Desorption followed by GC analysis
Benzopyrene (BaP) - particulate phase only, ng/m3	Annual*	1	1	Solvent extraction followed by HPLC/GC analysis
Arsenic (As), ng/m3	Annual*	6	6	AAS/ICP method after sampling on EMP 2000 or equivalent filter paper
Nickel (Ni), ng/m3	Annual*	20	20	AAS/ICP method after sampling on EMP 2000 or equivalent filter paper
* Annual arithmetic mean of minimum 104 measurements in a year at a particular site taken twice a week 24 hourly at uniform intervals. ** 24 hourly or 8 hourly or 1 hourly monitored values, as applicable, shall be compiled with 98% of the time in a year. 2% of the time, theymay exceed the limits but not on two consecutive days of monitoring. Note - Whenever and wherever monitoring results on two consecutive days of monitoring exceed the limits specified above for the respective category, it shall be considered adequate reason to institute regular or continuous monitoring and further investigation.

3.2 Monitoring

The National Air Monitoring Programme (NAMP) is a nation-wide program headed by the Central Pollution Control Board whose purpose is to monitor levels of key air pollutants, report violations, and conduct research on pollution trends. NAMP monitors levels of SO₂, NO₂, Suspended Particulate Matter (SPM), and Respirable Suspended Particulate Matter (RSPM / PM₁₀) at 342 operating stations in 127 cities across India. The NAMP publishes a list of cities that violate air quality standards, which can be found here.
On 29 November 2011, MoEP announced the expansion of monitoring to include PM_2.5 at select locations in major cities.

4 Links

4.1 Regulatory Documents

• Environment (Protection) Act of 1986

• Revised National Ambient Air Quality Standards 2009

Additional resources:

• Ministry of Environment and Forest (MoEF)

• National Air Monitoring Programme (NAMP)

• List of Non-Attainment Cities

4.2 Notes

1. ↑ Quoted from The Air (Prevention and Control of Pollution) Act

http://www.indiaenvironmentportal.org.in/files/826.pdf