Based on Savita Oil Technologies Limited's documentation for their Transol transformer oils, these products are high-quality mineral insulating oils designed for use in transformers, switchgears, and circuit breakers

 

Based on Savita Oil Technologies Limited's documentation for their Transol transformer oils, these products are high-quality mineral insulating oils designed for use in transformers, switchgears, and circuit breakers. Below are the key safety, physical, and handling details based on standard safety data sheet (SDS) information for these products. Savita Oil Technologies : Always consult the specific, up-to-date Safety Data Sheet provided by Savita for the particular grade of oil (e.g., Transol GEX, HGX) before use.

 1. Product Description and Hazards Composition: Derived from highly refined paraffinic or naphthenic mineral base oils, often hydro-treated.Safety Classification: Typically, these mineral oils are not classified as dangerous goods for transportation or as hazardous substances under standard regulations.Hazards: Prolonged or repeated skin contact may cause defatting (drying) and irritation, potentially leading to dermatitis.

Fire Hazard: Stable at normal temperatures. It is not considered flammable, but will burn if heated to temperatures above its flash point (>140°C - >180°C depending on grade). Savita Oil Technologies +42. 

Physical and Chemical Properties (Typical) Form: Liquid, typically light yellow or colorless.

Odour: Almost odourless or faint characteristic odour.

Density: Approx. 0.820 - 0.888 g/cm³ at 15°C/20°C.

Flash Point: >140°C (PMCC) to >180°C.

Pour Point: Typically < -15°C to < -45°C.

Solubility: Insoluble in water; soluble in organic solvents.Auto-ignition Temperature: >400°C. Morris Lubricants +43. 

Safety and Handling Precautions Handling: Avoid prolonged or repeated skin contact. Use personal protective equipment. Ensure proper ventilation, especially when handling at high temperatures.

Eye Protection: Wear safety goggles if there is a risk of splashing.

Skin Protection: Wear oil-resistant protective gloves and, if necessary, protective clothing.

Hygiene: Wash hands before eating, drinking, or smoking. Change contaminated clothing.

Storage: Store in cool, dry, well-ventilated areas in closed containers.

Fire Fighting: Use foam, dry chemical, or carbon dioxide (\(CO_{2}\)) to extinguish fires. Do not use water jet, as this may scatter the fire. 

First Aid Measures Skin Contact: Remove contaminated clothing. Wash skin with soap and water.

Eye Contact: Flush with large amounts of water for several minutes.Inhalation: Remove person to fresh air. If irritation persists, seek medical advice.

Ingestion: Do not induce vomiting. Clean mouth with water. Seek medical advice if large amounts are swallowed.

 Environmental and Disposal Details Environmental Impact: Mineral oils are generally not considered readily biodegradable. Do not allow to enter drains or waterways.

Disposal: Dispose of in accordance with local environmental regulations. Contaminated packaging should be treated as waste.

. Specific Savita Product Notes (2026 Context) Transol Range: Meets IEC 60296:2020 and ASTM D 3487 specifications.

Additives: Inhibited grades (e.g., GEX, HGX) contain DBPC (Di-tert-butyl-p-cresol) as an antioxidant.Safety Note: These oils are strictly free from PCB (Polychlorinated Biphenyls).Alternative: Savita also offers bioTRANSOL HF, a fire-safe (Flash point >320°C), biodegradable natural ester-based dielectric fluid.