Chemical Change vs. Physical Change

Modified 01:30, 14 Apr 2013 by Delmar

The difference between a physical reaction and a chemical reaction is composition. In a chemical reaction, there is a change in the composition of the substances in question; in a physical change there is a difference in the appearance, smell, or simple display of a sample of matter without a change in composition. Although we call them physical "reactions," no reaction is actually occurring. In order for a reaction to take place, there must be a change in the elemental composition of the substance in question. Thus, we shall simply refer to physical "reactions" as physical changes from now on. 

1. 1. Introduction
2. 2. Common Physical Changes    2.1. Texture
       2.2. Color
       2.3. Temperature
       2.4. Shape
       2.5. Change of State
   
   3. Physical Properties
   
       3.1. Luster
       3.2. Malleability
       3.3. Ability to be drawn into a thin wire
       3.4. Density
       3.5. Viscosity
   
   4. Common Chemical Changes
   
       4.1. Change in Temperature
       4.2. Change in Color
       4.3. Noticeable Odor
       4.4. Formation of a Precipitate
       4.5. Formation of Bubbles
   
   5. References
   6. Outside Links
   7. Problems
   8. Answers
   9. Contributors

Introduction

Physical changes are limited to changes that result in a difference in display without changing the composition. Some common changes (but not limited to) are: 

• Texture
• Color
• Temperature
• Shape
• Change of State (Boiling Point and Melting Point are significant factors in determining this change.)

Physical properties include many other aspects of a substance. The following are (but not limited to) physical properties.

• Luster
• Malleability
• Ability to be drawn into a thin wire
• Density
• Viscosity
• Solubility
• Mass
• Volume 

Any change in these physical properties is referred to as a physical change. For further information, please refer to Properties of Matter.
Chemical changes, on the other hand, are quite different. A chemical change occurs when the substance's composition is changed. When bonds are broken and new ones are formed a chemical change occurs. The following are indicators of chemical changes:

• Change in Temperature
• Change in Color
• Noticeable Odor (after reaction has begun)
• Formation of a Precipitate
• Formation of Bubbles

Note: When two or more reactants are mixed and a change in temperature, color, etc. is noticed, a chemical reaction is probably occurring. These are not definite indicators; a chemical reaction may not be occurring. A change  in color is not always a chemical change. If one were to change the color of a substance in a non-chemical reaction scenario, such as painting a car, the change is physical and not chemical. This is because the composition of the car has not changed. Proceed with caution.

Common Physical Changes

Texture

The texture of a substance can differ with a physical change. For example, if a piece of wood was sanded, waxed, and polished, it would have a very different texture than it initially had as a rough piece of wood.

Rough Wood                                                          Finished Wood

   

As you can see, the texture of the finished wood is much smoother than the initial grainy wood.

Color

The changing of color of a substance is not necessarily an indicator of a chemical change. For example, changing the color of a metal does not change its physical properties. However, in a chemical reaction, a color change is usually an indicator that a reaction is occurring. The guy painting the metal car is not changing the composition of the metallic substance.

Painting a Car

Temperature

Although we cannot see temperature change, unless if a change of state is occurring, it is a physical change.

Hot Pan

One cannot see the pan physically changing shape, color, texture, or any of the other physical properties. However, if one were to touch the pan, it would be incredibly hot and could cause a burn. Sitting idle in a cupboard, this pan would be cold. One cannot assess this change only through visual exposure; the use of a thermometer or other instrument is necessary.

Shape

The shape of an object can be changed and the object will still remain true to its chemical composition. For example, if one were to fold money, as shown by the figure below, the money is still chemically the same.

Origami Money

Change of State

The change of state is likewise a physical change. In this scenario, one can observe a number of physical properties changing, such as viscosity and shape. As ice turns into water, it doesn't retain a solid shape and now becomes a viscous fluid.
The physical "reaction" for the change of ice into liquid water is:

H₂O (s) → H₂O (l)

Ice Melting

The following are the changes of state:

Solid→Liquid	Melting
Liquid→Gas	Vaporization
Liquid→Solid	Freezing
Gas→Liquid	Condensation
Solid→Gas	Sublimation

If heat is added to a substance, such as in melting, vaporization, and sublimation, the process is endothermic. In this instance, heat is increasing the speed of the molecules causing them move faster.

If heat is removed from a substance, such as in freezing and condensation, then process is exothermic. In this instance, heat is decreasing the speed of the molecules causing them move slower.

Physical Properties

Luster

The luster of an element is defined as the way it reacts to light. Luster is a quality of a metal. Almost all of the metals, transition metals, and metalloids are lusterous. The non-metals and gases are not lusterous. For example, oxygen and bromine are not lusterous. Shown below is are lusterous paper clips.

Lusterous Paperclips

Malleability

Malleability is also a quality of metals. Metals are said to be malleable. This means that the metals can deform under an amount of stress. For example, if you can hit a metal with a mallet and it deforms, it is malleable. Also, a paperclip can be shaped with bare hands.

Bent Paperclip

The image shows the malleability of a certain metal as stress is applied to it.

Ability to be drawn into a thin wire

In materials science, this property is called ductility. For example, raw copper can be obtained and it can be purified and wrapped into a cord. Once again, this property is characteristic of mainly metals, nonmetals do not possess this quality.

Copper Wire

Density

The density of an object is its mass divided by its volume (d=m/v). A substance will have a higher density if it has more mass in a fixed amount of volume. For example, take a ball of metal, roughly the size of a baseball, compressed from raw metal. Compare this to a baseball made of paper. The baseball made of metal has a much greater weight to it in the same amount of volume. Therefore the baseball made out of metal has a much higher density. The density of an object will also determine whether it will sink or float in a particular chemical. Water for example has a density of 1g/cm³. Any substance with a density lower than that will float, while any substance with a density above that will sink.

Oil Sinking in a Glass of Water

Viscosity

Viscosity is defined to be the resistance to deformation of a particular chemical substance when a force is applied to it. In the example below, one can see two cubes falling into two different test tubes. The upper substance shows a violent reaction to the dropping of the cube. The lower substance simply engulfs it slowly without much reaction. The upper substance has a lower viscosity relative to the lower substance, which has very high viscosity. One may even think of viscosity in terms of thickness. The substance with more thickness has higher viscosity than a substance that is deemed "thin." Water has a lower viscosity than honey or magma, which have relatively high viscosities. 

Viscosity of Fluids

Common Chemical Changes

The follow are all indicators of chemical reactions. For further information on chemical reactions, please refer to Chemical Reactions.

Change in Temperature

A change in temperature is characteristic of a chemical change. During an experiment, one could dip a thermometer into a beaker or Erlenmeyer Flask to verify a temperature change. If temperature increases, as it does in most reactions, a chemical change is likely to be occurring. This is different from the physical temperature change. During a physical temperature change, one substance, such as water is being heated. However, in this case, one compound is mixed in with another, and these reactants produce a product. When the reactants are mixed, the temperature change caused by the reaction is an indicator of a chemical change.

Violent Reaction (Fireworks) that has Heat as a Product

In the reaction above, a hot chemical is shooting out of an Erlenmeyer flask. The temperature after the reactants were mixed increased incredibly in this reaction.

The following reaction has heat as a product. It is exothermic. However, do not be fooled; every exothermic change is not a chemical change. The melting of an ice cube, which is also exothermic, is a change in a physical property and not composition. Thus, it is a physical change.

Reaction: Fe₂O₃ + 2Al → 2Fe + Al₂O₃ + Heat

Change in Color

A change in color is also another characteristic of a chemical reaction taking place. For example, if one were to observe the rusting of metal over time, one would realized that the metal has changed color and turned orange. This change in color is evidence of a chemical reaction. However, one must be careful; sometimes a change in color is simply the mixing of two colors, but no real change in the composition of the substances in question. 

Metal Rusting

The reaction above is that of the rusting of iron.
Reaction: 4Fe + 3O₂ + 6H₂O → 4Fe(OH)₃

Noticeable Odor

When two or more compounds or elements are mixed and a scent or odor is present, a chemical reaction has taken place. For example, when an egg begins to smell, (a rotten egg) a chemical reaction has taken place. This is the result of a chemical decomposition. 

Spoiled Egg

Formation of a Precipitate

The formation of a precipitate may be one of the most common signs of a chemical reaction taking place. A precipitate is defined to be a solid that forms inside of a solution or another solid. Precipitates should not be confused with suspensions, which are solutions that are homogeneous fluids with particles floating about in them. For instance, when a soluble carbonate reacts with Barium, a Barium Carbonate precipitate can be observed.

Test Tube

Reaction: Ba²⁺(aq) + CO₃^2-(aq) → BaCO₃(s)
For further information, please refer to Classification of Matter.

Formation of Bubbles

The formation of bubbles, or rather a gas, is another indicator of a chemical reaction taking place. When bubbles form, a temperature change could also be taking place. Temperature change and formation of bubbles often occur together. For example, in the following image, one can see a gas spewing. This is the formation of a gas. 

Gas Formation

However, most reactions are much more subtle. For instance, if the following reaction occurs, one may notice Carbon Dioxide bubbles forming. If there is enough Hydrochloric Acid, bubbles are visible. If there isn't, one can't readily notice the change.

Reaction: Na₂CO₃ + 2HCl → 2NaCl + H₂O + CO₂

References

1. Chang, Raymond. General Chemistry: the Essential Concepts. Boston, MA: McGraw-Hill Higher Education, 2006. Print.    
2. Chemistry for Dummies. For Dummies, 2008. Print.
3. Petrucci, Ralph H. General Chemistry Principles and Modern Applications. Upper Saddle River, NJ: Pearson/Prentice Hall, 2007. Print.

Outside Links

• http://en.wikipedia.org/wiki/Physical_property
• http://en.wikipedia.org/wiki/Viscosity
• http://www.chemtutor.com/ms.htm#ionize
• http://en.wikipedia.org/wiki/Density
• http://en.wikipedia.org/wiki/Precipitate
• http://en.wikipedia.org/wiki/Chemical_reaction
• http://www.sxc.hu

All images are courtesy of http://www.sxc.hu, which provides royalty free images that are free to be copied without restrictions.
The viscosity image is also free to be duplicated as per permission of author on wikipedia.com.

Problems

1. Which of the following is a chemical reaction?

a) Freezing liquid Mercury

b) Adding yellow to blue to make green

c) Cutting a piece of paper into two pieces

d) Dropping a sliced orange into a vat of Sodium Hydroxide 

e) Filling a balloon with natural air

2. Which of the following is a physical reaction?

a) Shattering Glass with a baseball

b) Corroding Metal

c) Fireworks Exploding

d) Lighting a match

e) Baking a cake

3. Which of the following is a chemical reaction?

a) Painting a wall blue

b) A bicycle rusting

c) Ice cream melting

d) Scratching a key across a desk

e) Making a sand castle

4. Which of the following is a physical reaction?

a) Frying an egg

b) Digesting carrots

c) A Macbook falling out of a window

d) Creating ATP in the human body

e) Dropping a fizzy tablet into a glass of water

5. Write C for Chemical Reaction or P for Physical Reaction.

a) Burning Leaves

b) Cutting Diamonds

c) Crushing a pencil

d) Salivary Amylase breaking down food in the mouth

e) Salt mixing in with water

Answers

1. D
2. A
3. B
4. C
5.     a) C

b) P

c) P

d) C

e) Neither. This is one of the gray areas of chemical change and physical change. Although the salt has dissociated into Sodium and Chloride ions, it is still salt in water. Salt, initially is actually just a conglomerate of sodium and chloride ions and by dissociating them, just the arrangement of the ions has changed. Please click here for more information.

Contributors

• Mandeep Sohal (mdsohal@ucdavis.edu)

This page viewed 94124 times