Fire extinguisher and hoses should be inspected regularly to ensure they are in good working order and readily available for use. A monthly inspection should include checking for physical damage, proper pressure (if equipped with a gauge), and ensuring the safety pin and tamper seal are intact. Additionally, hoses should be checked for obstructions, damage, and signs of aging.
Fire Extinguisher Inspection:
Location: Ensure the extinguisher is mounted in a visible and accessible location.
Physical Damage: Look for dents, rust, corrosion, or other signs of damage on the cylinder, valve, handle, or other parts.
Tamper Seal: Verify the safety pin and tamper seal are intact and in place.
Pressure Gauge: Check the pressure gauge (if equipped) to ensure it's within the green or full zone.
Inspection Tag: Verify the inspection tag indicates the extinguisher has been inspected within the last month.
Fire Hose Inspection:
Physical Condition:
Visually inspect the hose for any signs of damage, such as cuts, abrasions, or bulges.
Couplings and Nozzles:
Check couplings, nozzles, and valves for proper operation and any potential defects.
Hose Condition:
Ensure the hose is free of obstructions and shows no signs of cracking or dry rot.
Maintenance:
Fire extinguishers should be inspected monthly and serviced annually by a professional fire protection service.
Internal maintenance, including a hydrostatic test, is typically performed every 1-6 years, depending on the type of extinguisher.
Hoses should also be inspected regularly and serviced according to manufacturer recommendations.
Key Points:
A regular inspection program helps ensure that fire extinguishers and hoses are ready for use in an emergency.
If any damage or issues are found during inspection, the extinguisher or hose should be marked as defective and reported for repair or replacement.
It's crucial to follow manufacturer instructions and relevant safety standards when inspecting and maintaining fire extinguishers and hoses.
No comments:
Post a Comment