Monday, 2 November 2026

This infographic is breaking down that "risk assessment" is not one single form. Same goal for all of them — to identify, evaluate and control risks — but you pick the type based on what you're looking at and how you need to measure it.

 This infographic is breaking down that "risk assessment" is not one single form. Same goal for all of them — to identify, evaluate and control risks — but you pick the type based on what you're looking at and how you need to measure it.




Think of the 8 types in 3 groups:


Group 1: What are you assessing? This is the scope.


1. Risk Assessment by Activity

Focuses on a specific job or task people are doing.

Example: Working at height, hot work, lifting operations, scaffolding erection. You ask: what can go wrong while doing this task?


2. Risk Assessment by Hazard

Focuses on one specific hazard wherever it appears.

Example: Chemical hazard, electrical hazard, fire, noise, radiation. You ask: where is this hazard present and who is exposed?


3. Risk Assessment by Area / Location

Focuses on a place, not a task. You assess everything in that location.

Example: Tank farm, confined space, workshop, warehouse, laboratory. Common for area-based PTW and site inspections.


4. Risk Assessment by Project

Focuses on a major change or a whole project lifecycle.

Example: New plant construction, plant modification, turnaround/shutdown, decommissioning. This is bigger picture, covers design, procurement, execution, handover.


Group 2: How are you measuring the risk?


5. Qualitative Risk Assessment

Uses descriptive judgement, not numbers. Low / Medium / High, or a 3x3 or 5x5 risk matrix.

Example: "High risk of fall from height if no harness used."

Fast, practical, and what most site teams use daily for toolbox talks.


6. Quantitative Risk Assessment (QRA)

Uses numbers, data and calculations. Risk score, probability, frequency, consequences.

Example: "1 in 1,000,000 chance of fatality per year" or "QRA for a gas plant shows 2.5 x 10^-4 risk."

Needed for high-hazard industries, process safety, and when you need to justify expensive controls with hard data.

Qualitative tells you how bad it feels, Quantitative tells you how likely it actually is in numbers. Most good assessments start qualitative, and go quantitative if the risk is high.

Group 3: When and at what level?


7. Dynamic Risk Assessment

This is the ongoing, on-the-spot assessment during the work. You do it in your head, continuously.

Example: Weather suddenly changes, wind picks up during lifting, you notice oil spill, new contractor enters area. You stop, reassess, control.

This is what keeps workers alive after the paper risk assessment is signed.


8. Strategic Risk Assessment

Looks beyond the site, at long-term organizational risks.

Example: Market changes, new regulatory requirements from NESREA or NMDPRA, business continuity, reputation, supply chain failure. Done by leadership, not the site HSE officer.


How they work together in real life


Say you have a shutdown project in a tank farm:


You do a Strategic assessment at management level, then a Project assessment for the shutdown.

For the tank farm itself, you do an Area assessment.

Inside that, you have specific Hazard assessments for H2S, fire.

And Activity assessments for each task: confined space entry, hot work.

You score them Qualitatively first, and if the H2S risk is High, you run a Quantitative dispersion study.

And the whole time, the team is doing Dynamic assessment.


Key Takeaway from the infographic

Choose the right type of risk assessment based on the situation, to keep people, assets and the environment safe.

You don't use a Project QRA for a simple toolbox task, and you don't use a simple qualitative checklist for a new plant design. Matching the type to the job is what makes it effective, not just compliant. 🚨🌡️🏗️🗼⛑️🦺⚠️🚥🚧🚦

#facebookviral #ConstructionSafety #viralreelschallenge #SafetyCulture #viralreels #ToolboxTalk #fypシ #safetyfirst #fyp #safety

No comments:

Post a Comment