Promotion of Environment, Health, Safety, AND Quality-Laboratory for Good Governance of govt.,Company,Industry,Institution DEDICATED TO NAGARJUNA GROUP WE ARE HIGHLY THANKFUL TO Shri KS RAJU SIR- CMD, Shri RAHUL RAJU SIR –MD and Sirs as Shri P.P.SINGH, Shri R.RAGHAVAN, Shri Kaira Gangaiah,Shri ABHAY SINGH, Shri GVS ANAND ,Shri. VK GROVER ,Shri V.S SUNDER ,Shri PC MOHAN ,Shri PHN REDDY , Shri BHSN RAJU,Shri JK PRASAD , SHRI JV PRASAD AND DEDICATED ASSOCIATES.
A definite plan to deal with major emergencies is an important element of OH&S programs.
Besides the major benefit of providing guidance during an emergency, developing the plan has other advantages. You may discover unrecognized hazardous conditions that would aggravate an emergency situation and you can work to eliminate them. The planning process may bring to light deficiencies, such as the lack of resources (equipment, trained personnel, supplies), or items that can be rectified before an emergency occurs. In addition an emergency plan promotes safety awareness and shows the organization's commitment to the safety of workers.
The lack of an emergency plan could lead to severe losses such as multiple casualties and possible financial collapse of the organization.
An attitude of "it can't happen here" may be present. People may not be willing to take the time and effort to examine the problem. However, emergency planning is an important part of company operation.
Since emergencies will occur, preplanning is necessary. An urgent need for rapid decisions, shortage of time, and lack of resources and trained personnel can lead to chaos during an emergency. Time and circumstances in an emergency mean that normal channels of authority and communication cannot be relied upon to function routinely. The stress of the situation can lead to poor judgment resulting in severe losses.
What is the overall objective of the plan?
An emergency plan specifies procedures for handling sudden or unexpected situations. The objective is to be prepared to:
Prevent fatalities and injuries.
Reduce damage to buildings, stock, and equipment.
Protect the environment and the community.
Accelerate the resumption of normal operations.
Development of the plan begins with a vulnerability assessment. The results of the study will show:
How likely a situation is to occur.
What means are available to stop or prevent the situation.
What is necessary for a given situation.
From this analysis, appropriate emergency procedures can be established.
At the planning stage, it is important that several groups be asked to participate. Among these groups, the health and safety committee can provide valuable input and a means of wider worker involvement. Appropriate municipal officials should also be consulted since control may be exercised by the local government in major emergencies and additional resources may be available. Communication, training and periodic drills will ensure adequate performance if the plan must be carried out.
What is a vulnerability assessment?
Although emergencies by definition are sudden events, their occurrence can be predicted with some degree of certainty. The first step is to find which hazards pose a threat to any specific enterprise.
When a list of hazards is made, records of past incidents and occupational experience are not the only sources of valuable information. Since major emergencies are rare events, knowledge of both technological (chemical or physical) and natural hazards can be broadened by consulting with fire departments, insurance companies, engineering consultants, and government departments.
What are technological and natural hazards?
Examples of technological hazards are:
Major structural failure.
Spills of flammable liquids.
Accidental release of toxic substances.
Deliberate release of hazardous biological agents, or toxic chemicals.
Other terrorist activities.
Exposure to ionizing radiation.
Loss of electrical power.
Loss of water supply.
Loss of communications.
Areas where flammables, explosives, or chemicals are used or stored should be considered as the most likely place for a technological hazard emergency to occur.
The risk from natural hazards is not the same across Canada but the list would include:
Other severe wind storms.
Snow or ice storms.
Severe extremes in temperature (cold or hot).
Pandemic diseases like influenza.
The possibility of one event triggering others must be considered. An explosion may start a fire and cause structural failure while an earthquake might initiate many of the technological events listed above.
What is the series of events or decisions that should be considered?
Having identified the hazards, the possible major impacts of each should be itemized, such as:
Sequential events (for example, a fire after an explosion).
Damage to plant infrastructure.
Loss of vital records/documents.
Damage to equipment.
Disruption of work.
Based on these events, the required actions are determined. For example:
Sound the alert.
Evacuate danger zone.
Close main shutoffs.
Call for external aid.
Initiate rescue operations.
Attend to casualties.
The final consideration is a list and the location of resources needed:
Auxiliary communication equipment.
Chemical and radiation detection equipment.
Emergency protective clothing.
Fire fighting equipment.
What are the elements of the emergency plan?
The emergency plan includes:
All possible emergencies, consequences, required actions, written procedures, and the resources available.
Detailed lists of personnel including their home telephone numbers, their duties and responsibilities.
Large scale maps showing evacuation routes and service conduits (such as gas and water lines).
Since a sizable document will likely result, the plan should provide staff members with written instructions about their particular emergency duties.
The following are examples of the parts of an emergency plan. These elements may not cover every situation in every workplace but serve they are provided as a general guideline when writing a workplace specific plan:
The objective is a brief summary of the purpose of the plan; that is, to reduce human injury and damage to property and environment in an emergency. It also specifies those staff members who may put the plan into action. The objective identifies clearly who these staff members are since the normal chain of command cannot always be available on short notice. At least one of them must be on the site at all times when the premises are occupied. The extent of authority of these personnel must be clearly indicated.
One individual should be appointed and trained to act as Emergency Co-ordinator as well as a "back-up" co-ordinator. However, personnel on site during an emergency are key in ensuring that prompt and efficient action is taken to minimize loss. In some cases it may be possible to recall off-duty employees to help, but the critical initial decisions usually must be made immediately.
Specific duties, responsibilities, authority, and resources must be clearly defined. Among the responsibilities that must be assigned are:
Reporting the emergency.
Activating the emergency plan.
Assuming overall command.
Alerting external agencies.
Confirming evacuation is complete.
Alerting outside population of possible risk.
Requesting external aid.
Coordinating activities of various groups.
Advising relatives of casualties.
Providing medical aid.
Ensuring emergency shut offs are closed.
Sounding the all-clear.
This list of responsibilities should be completed using the previously developed summary of countermeasures for each emergency situation. In organizations operating on reduced staff during some shifts, some personnel must assume extra responsibilities during emergencies. Sufficient alternates for each responsible position must be named to ensure that someone with authority is available onsite at all times.
External organizations that may be available to assist (with varying response times) include:
Mobile rescue squads.
These organizations should be contacted in the planning stages to discuss each of their roles during an emergency. Mutual aid with other industrial facilities in the area should be explored.
Pre-planned coordination is necessary to avoid conflicting responsibilities. For example, the police, fire department, ambulance service, rescue squad, company fire brigade, and the first aid team may be on the scene simultaneously. A pre-determined chain of command in such a situation is required to avoid organizational difficulties. Under certain circumstances, an outside agency may assume command.
Possible problems in communication have been mentioned in several contexts. Efforts should be made to seek alternate means of communication during an emergency, especially between key personnel such as overall commander, on-scene commander, engineering, fire brigade, medical, rescue, and outside agencies. Depending on the size of the organization and physical layout of the premises, it may be advisable to plan for an emergency control centre with alternate communication facilities. All personnel with alerting or reporting responsibilities must be provided with a current list of telephone numbers and addresses of those people they may have to contact.
Many factors determine what procedures are needed in an emergency, such as:
Nature of emergency.
Degree of emergency.
Size of organization.
Capabilities of the organization in an emergency situation.
Immediacy of outside aid.
Physical layout of the premises.
Common elements to be considered in all emergencies include pre-emergency preparation and provisions for alerting and evacuating staff, handling casualties, and for containing the danger.
Natural hazards, such as floods or severe storms, often provide prior warning. The plan should take advantage of such warnings with, for example, instructions on sand bagging, removal of equipment to needed locations, providing alternate sources of power, light or water, extra equipment, and relocation of personnel with special skills. Phased states of alert allow such measures to be initiated in an orderly manner.
The evacuation order is of greatest importance in alerting staff. To avoid confusion, only one type of signal should be used for the evacuation order. Commonly used for this purpose are sirens, fire bells, whistles, flashing lights, paging system announcements, or word-of-mouth in noisy environments. The all-clear signal is less important since time is not such an urgent concern.
The following are "musts":
Identify evacuation routes, alternate means of escape, make these known to all staff; keep the routes unobstructed.
Specify safe locations for staff to gather for head counts to ensure that everyone has left the danger zone. Assign individuals to assist employees with disabilities.
Carry out treatment of the injured and search for the missing simultaneously with efforts to contain the emergency.
Provide alternate sources of medical aid when normal facilities may be in the danger zone.
Ensure the safety of all staff (and/or the general public) first, then deal with the fire or other situation.
Testing and Revision
Completing a comprehensive plan for handling emergencies is a major step toward preventing disasters. However, it is difficult to predict all of the problems that may happen unless the plan is tested. Exercises and drills may be conducted to practice all or critical portions (such as evacuation) of the plan. A thorough and immediate review after each exercise, drill, or after an actual emergency will point out areas that require improvement. Knowledge of individual responsibilities can be evaluated through paper tests or interviews.
The plan should be revised when shortcomings have become known, and should be reviewed at least annually. Changes in plant infrastructure, processes, materials used, and key personnel are occasions for updating the plan.
It should be stressed that provision must be made for the training of both individuals and teams, if they are expected to perform adequately in an emergency. An annual full-scale exercise will help in maintaining a high level of proficiency.