Fire Protection Fit-Out Project - Important Rules
1. Sprinkler System
Use UL/FM approved sprinklers only.
Follow NFPA 13 / BS EN 12845 standards.
Correct type: Pendant / Upright / Sidewall /Concealed.
Spacing normally 3m x 3m (as per hazard class).
Keep 100-150 mm away from wall.
No obstruction from lights / ducts / beams.
Hydro pressure test 200 psi - 2 hrs.
Provide control valve, flow switch, drain valve.
2. Fire Extinguishers
Provide correct type.
ABC- General.
CO₂- Electrical.
Foam - Fuel/Oil.
Wet Chemical - Kitchen.
Mount height 1-1.5 m from floor.
Travel distance max 15-20 m.
Clear signage & visibility.
Not inside locked rooms.
Annual inspection & refill tag.
3. Fire Alarm System
Smoke detectors rooms/offices.
Heat detectors - kitchen/parking.
Beam detectors - warehouses.
Manual Call Points near exits.
Sounder + Strobe in all zones.
Fire rated cable 2-hour rating.
Battery backup 24 hr standby + alarm time.
Panel should be Addressable for large buildings.
No comments:
Post a Comment