Tuesday, 15 May 2012

Water Quality Monitoring :ammonium, nitrate, nitrite, chloride, fluoruride or cyanide ions.

ES 9010

Series of analyzers for the specific measurement of ammonium, nitrate, nitrite, chloride, fluoruride or cyanide ions.

 

  • Operation on an unfiltered sample
  • Fully automated measuring, calibration and cleaning sequences
  • Electronic compensation of all variations in the measurement process
  • Electrochemical measurement rather than colorimetric (no interferences due to color or suspended solids)
  • Validity criteria calculated for each measurement before result transmission
  • Large volume measuring cell for increased reproducibility
  • Use of high precision pneumatic dozers

  • Programmable measurement ranges:

- ES 9010 NH4+ : 0-2 / 0-10 / 0-100 / 0-1000 mg/l
- ES 9010 NO3- : 0-10 / 0-100 / 0-500 / 0-1000 mg/l
- ES 9010 NO2- : 0-10 / 0-100 / 0-500 / 0-1000 mg/l
- ES 9010 CN- : 0-0.2 / 0-1 / 0-10 / 0-100 mg/l
- ES 9010 Cl- : 0-10 / 0-100 / 0-1000 mg/l
- ES 9010 F- : 0-1 / 0-10 / 0-100 / 0-1000 mg/l

  • Lower detectable limit:
- ES9010 NH4+ : 0.05 mg/l
- ES9010 NO3- : 1 mg/l
- ES9010 NO2- : 1 mg/l
- ES 9010 CN- : 0.003 mg/l
- ES 9010 Cl- : 0.1 mg/l
- ES 9010 F- :0.01 mg/l

  • Display resolution: 0.01 mg/l
  • Average response time: 10 minutes
  • Sample volume: 50 ml
  • Minimum sample flow rate: 100 l/h
  • Display: 2-line alphanumeric
  • Control keyboard: 16 keys
  • Power supply: 220 VAC +/-10 %, 4 A , 50 Hz
  • Power consumption: 100Wh
  • Temperature of use: + 5 to + 30°C

No comments:

Post a Comment