This poster is a quick field guide for Occupational Hygiene / HSE monitoring. It splits workplace hazards into 2 groups and shows the handheld instrument you use to Measure - Monitor - Manage each one.
The Big Idea
Environmental Hazards = what's in the air, water, soil and surroundings that can affect health and the environment.
Physical Hazards = physical conditions like heat, light, radiation, vibration that can injure you or damage equipment.
You don't guess them, you measure them and compare to a limit.
1. ENVIRONMENTAL HAZARDS - left side in green
- Gas Detector / Multi-Gas Monitor
Measures: O_2 (oxygen), LEL (Lower Explosive Limit - combustible gases), $CO$, H_2S, VOCs (Volatile Organic Compounds) and other toxic gases.
Why it matters: Tells you if air is breathable or explosive. Has audible, visual and vibration alarms, rugged and portable. Used for confined space entry, process areas, leak detection.
- Particulate Monitor / PM Meter
Measures: PM2.5, PM10 and total suspended dust.
Why it matters: Real-time dust exposure check. Critical in construction, demolition, mining, cement, woodwork.
- Sound Level Meter / Decibel Meter
Measures: Noise in dB(A) - A-weighted decibels, how humans hear.
Why it matters: Helps prevent noise-induced hearing loss. Has frequency weighting options. Used in industrial, construction, even noisy offices.
- Thermo-Hygrometer
Measures: Temperature in $C/F$ and Relative Humidity in %RH.
Why it matters: Monitors heat stress, thermal comfort, dehydration and fatigue risk. Used indoors and outdoors.
- Water Quality Tester
Measures: pH, temperature, turbidity, conductivity and DO (Dissolved Oxygen).
Why it matters: Multi-parameter, portable. Used for drinking water, wastewater, spill and environmental monitoring.
- Soil Testing Kit / pH Meter
Measures: pH, moisture, contamination levels, and heavy metals when combined with lab kits.
Why it matters: Quick field result for soil quality. Used in agriculture, construction and site remediation.
2. PHYSICAL HAZARDS - right side in yellow
- Infrared Thermometer (Non-contact)
Measures: Surface temperature.
Why it matters: Fast, no-touch reading. For hot surfaces, electrical panels, bearings, process equipment.
- Thermal Imaging Camera
Measures: Temperature distribution and hot spots.
Why it matters: Visualizes heat patterns. Finds overheating, insulation failure, electrical faults. Used in electrical, mechanical and building inspections.
- Lux Meter / Light Meter
Measures: Illuminance in lux.
Why it matters: Checks if there is enough light to work safely. Used in work areas, offices and hazardous locations.
- Radiation Detector / Geiger Counter
Measures: Ionizing radiation in mSv, µSv, CPM (counts per minute).
Why it matters: Detects alpha, beta and gamma radiation with audible/visual alerts. Used in nuclear, medical, NORM and contaminated areas.
- Vibration Meter
Measures: Vibration in mm/s, m/s^2, Hz.
Why it matters: Measures vibration in machinery to prevent equipment failure and hand-arm vibration issues. Used on rotating equipment, motors and heavy machinery.
- Ultraviolet (UV) Meter
Measures: UV intensity in mW/cm^2.
Why it matters: Measures UVA/UVB. Assesses sun exposure, welding arc exposure and UV curing processes. Used for outdoor work, welding, and curing lamps.
3. The bottom bar - how to use them right
- Control The Hazards: Measurement is not the end, it's for control.
- Use The Right Instrument: Don't use a gas detector for dust.
- Check & Calibrate Regularly: All these need bump test / calibration to be valid.
- Interpret Results, Take Action: Compare to OELs / TLVs / national limits, then act.
- Safer People, Cleaner Environment, A Sustainable Future
Tagline: Measure Today - A Safer Tomorrow.
In practice, this is your workflow: Identify hazard in your JSA/risk assessment > select the right tool from this chart > measure > compare to standard > apply controls. 🦺🚥🗼🚦🚨🌡️⚠️🚧⛑️🏗️
#

No comments:
Post a Comment